 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BC859 SOT-23 Silicon Planar Epitaxial Transistors TRANSISTORS(PNP) FEATURES * Ideally suited for automatic insertion * For switching and AF amplifier applications SOT-23 MECHANICAL DATA * * * * Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Marking: BC859=4D BASE 1 COLLECTOR 3 0.055(1.40) 0.047(1.20) 0.005(0.14) 0.003(0.09) 0.027(0.70) 0.020(0.50) EMITTER 0.045(1.15) 0.035(0.90) 0.004(0.12) 0.000(0.02) 2 0.018(0.48) 0.014(0.38) 0.102(2.60) 0.094(2.40) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. O 0.019(2.00) 0.071(1.80) 1 3 2 0.118(3.00) 0.110(2.80) Dimensions in inches and (millimeters) ABSOLUTE MAXIMUM RATINGS CHARACTERISTICS Collector-emitter voltage (+VBE = 1V) Collector-emitter voltage (open base) Collector current (peak value) Total power dissipation up to Tamb= 60 C Junction Temperature Small-signal current gain -IC= 2 mA; -VCE= 5 V; f = 1 kHz Transition frequency -IC=10 mA-VCE = 5 Vf = 100 MHz Noise figure at Rs = 2k -IC=200 A-VCE = 5 Vf = 30 Hz to 15 kHz f = 1 KHz; B = 200 Hz hfe fT SYMBOL -VCEX -VCEO -ICM Ptot TJ VALUE max. 30 max. 30 max. 200 max. 250 max. 150 >125 < 900 >100 MHz UNITS V V mA mW O C F F typ. 1,2 <4 <4 dB dB dB VD 2009-11 REV:O RATINGS (at TA = 25C unless otherwise specified) Limiting values CHARACTERISTICS Collector-base voltage (open emitter) Collector-emitter voltage (+VBE= 1 V) Collector-emitter voltage (open base) Emitter-base voltage (open collector) Collector current (d.c.) Collector current (peak value) Emitter current (peak value) Base current (peak value) Total power dissipation up to Tamb = 60 C** Storage temperature Junction temperature SYMBOL -VCBO -VCEX -VCEO -VEBO -IC -ICM IEM -IBM Ptot Tstg TJ MIN -55 to +150 - MAX 30 30 30 5 100 200 200 200 250 UNITS V V V V mA mA mA mA mW oC 150 oC THERMAL CHARACTERISTICS Tj= Px(Rth j-t+ Rh t-s+ Rth s-a) + Tamb Thermal resistance From junction to tab From tab to soldering points From soldering points to ambient** Rth j-t Rth t-s Rth s-a 60 280 90 K/W K/W K/W CHARACTERISTICSTj = 25 C unless otherwise specified Collector cut-off current IE= 0; -VCB = 30V; Tj= 25C Tj= 150C Base-emitter voltage -IC= 2 mA; -VCE = 5 V -IC= 10 mA; -VCE = 5 V Saturation voltages -IC= 10 mA; -IB = 0,5 mA -ICBO -ICBO -VBE -VBE -VCEsat -VBEsat -IC= 100 mA; -IB = 5 mA -VCEsat -VBEsat Collector capacitance at f = 1 MHz -IE = Ie = 0 ; -VCB = 10 V Cc typ. 1 < 15 <4 typ. 650 600 to 750 < 820 typ. 75 < 300 typ. 700 typ. 250 < 650 typ. 850 typ. 4.5 nA nA mA mV mV mV mV mV mV mV mV mV pF CHARACTERISTICS (Tj = 25 C unless otherwise specified) CHARACTERISTICS Transition frequency at f = 100 MHz -IC = 10 mA ; -VCE = 5 V Small-signal current gain at f = 1 kHz -IC= 2 mA; -VCE = 5 V Noise figure at RS= 2 k -IC= 200 A; -VCE = 5 V f = 30 Hz to 15 kHz f = 1 kHz; B = 200 Hz D.C. current gain -IC= 2 mA; -VCE = 5 mA ; total range A selections B selections C selections hFE hFE hFE hFE 125 125 220 420 to to to to 800 250 475 800 F F typ. 1.2 <4 typ. 1 <4 dB dB dB dB fT hfe > 100 125 to 800 MHz SYMBOL UNITS DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. |
Price & Availability of BC859
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |